➤
Oil & Gas Drilling Fundamentals and Well Control Preparation

Course Description

This comprehensive programme combines technical training, practical drilling simulation and competency assessment to develop participants’ understanding of drilling operations. It covers drilling fundamentals, rig equipment and systems, drillstring components, bottomhole assemblies, downhole tools, rig mathematics, drilling fluids, solids-control equipment, operational procedures and well control fundamentals.

The programme progresses from technical foundations to practical application. Participants explore the well construction sequence, equipment functions, operational calculations and common drilling problems before applying their knowledge in simulator scenarios. Practical activities include drilling ahead, making connections, tripping, responding to hole problems, detecting kicks, shutting in the well and conducting simulated well kill operations.

Assessment includes technical module assessments, an individual practical simulator assessment and a final written assessment. Each participant receives a Candidate Competency Report documenting assessment results, practical performance, non-technical skills, strengths and development needs. The programme provides a structured basis for evaluating operational knowledge and identifying areas for further improvement.

Course Objectives

Upon completion of the programme, participants will be able to:

  • Describe drilling fundamentals, well types, the well lifecycle and the sequence of drilling operations.
  • Explain the functions of major rig systems, including power, hoisting, rotating, circulating and well control systems.
  • Identify drillstring components and explain BHA design principles and the functions of downhole tools.
  • Perform calculations involving capacities, displacements, pump output, annular velocity, pressures and drilling fluids.
  • Explain drilling fluid functions, properties and testing, and evaluate the role of solids-control equipment.
  • Describe procedures for drilling, connections, tripping, casing running and cementing.
  • Recognise common drilling problems, including wellbore instability, stuck pipe, lost circulation and drillstring failures.
  • Explain well barriers, kick causes, warning signs, shut-in procedures and fundamental well kill methods.
  • Apply operational knowledge in simulated drilling and well control scenarios.
  • Demonstrate communication, teamwork, situational awareness and decision-making during practical exercises.

Audience

  • Drilling crew members and rig personnel.
  • Assistant drillers and personnel developing their operational responsibilities.
  • Junior drilling engineers and technical personnel supporting drilling activities.
  • Personnel requiring a structured refresher in rig systems, drilling calculations, operational procedures and well control fundamentals.
  • Personnel undertaking drilling simulator training and competency assessment.

Prerequisites

No formal entry prerequisites are specified in the programme. Pre-assessments are included to establish participants’ existing knowledge.

Course Content

  • Introduction to Drilling Operations
    • Introduction to drilling: geology, well lifecycle and well types.
    • Measured depth and true vertical depth.
    • Drilling rigs and personnel.
    • Overview of rig systems.
    • Drillstring and drill bits.
    • Introduction to drilling fluids.
    • Well design, casing and cementing.
    • Pressure and well control basics.
    • Drilling problems and the operations sequence.
    • Pre-assessment and final assessment.
  • Rig Equipment and Systems
    • Rig overview and major equipment functions.
    • Power generation and transmission.
    • Hoisting system.
    • Rotating system.
    • Circulating system.
    • Well control system: BOP, accumulator and choke manifold.
    • Pipe handling.
    • Instrumentation and maintenance.
    • Pre-assessment and final assessment.
  • Drillstring, BHA and Downhole Tools
    • Drillstring components.
    • Drillstring mechanics, design and failures.
    • Bottomhole assembly design principles.
    • Directional drilling and measurement tools.
    • Downhole motors and rotary steerable systems.
    • Measurement while drilling and logging while drilling.
    • Auxiliary downhole tools: jars, reamers and shock subs.
    • Pre-assessment and final assessment.
  • Rig Mathematics
    • Units and calculation fundamentals.
    • Geometry for the rig floor.
    • Capacities and displacements.
    • Pump calculations.
    • Annular velocity and tripping calculations.
    • Pressure fundamentals.
    • Formation pressure and fracture pressure.
    • Leak-off tests.
    • Maximum allowable annular surface pressure.
    • Equivalent circulating density.
    • Kill sheet calculations.
    • Mud, slug and buoyancy calculations.
    • Pre-assessment, review and final assessment.
  • Drilling Fluids and Solids-Control Equipment
    • Drilling fluids and the circulating system.
    • Fluid functions, types, chemistry and additives.
    • Fluid properties and testing.
    • Drilled solids and their impact.
    • Solids-control equipment arrangement and operation.
    • Equipment performance and troubleshooting.
    • Waste management and HSE considerations.
    • Case study and review.
    • Pre-assessment and final assessment.
  • Drilling Operations and Procedures
    • Pre-spud preparation.
    • Conductor and surface hole operations.
    • Intermediate and production sections.
    • Leak-off tests and formation integrity tests.
    • Connections and tripping.
    • Casing running and cementing.
    • Hole cleaning and wellbore instability.
    • Stuck pipe.
    • Lost circulation.
    • Drillstring failures and fishing.
    • Pre-assessment and final assessment.
  • Well Control Fundamentals
    • Introduction to well control and its importance.
    • Pressure concepts and well barriers.
    • Causes of kicks.
    • Kick warning signs and detection.
    • Shut-in procedures.
    • Tabletop pit monitoring and trip drills.
    • Gas behaviour and influx migration.
    • Driller’s Method.
    • Wait and Weight Method.
    • Well control complications and non-circulating methods.
    • Well control equipment in operation.
    • Crew roles and well control drills.
    • Pre-assessment, review and final assessment.
  • Practical Rig Simulation and Competency Assessment
    • Programme briefing, crew roles and console familiarisation.
    • Drilling ahead and making connections.
    • Tripping with a trip sheet.
    • Simulated hole problems: lost circulation and stuck pipe.
    • Simulated equipment failures.
    • Kick detection and shut-in during drilling and tripping.
    • Kill operation using the Driller’s Method.
    • Kill operation using the Wait and Weight Method.
    • Scenario replay and debriefing.
    • Individual practical simulator assessment.
    • Final written assessment covering the seven technical modules.
    • Results, feedback and competency report sign-off.

Certification

Each participant receives a Candidate Competency Report documenting attendance, technical assessment results, practical simulator competencies, non-technical skills, safety-critical assessment elements, strengths and development needs.

Assessment requirements include a 70% pass mark for technical module assessments and a minimum of 70% overall in the final written assessment, including at least 7 out of 10 in the well control section. The practical simulator assessment covers twelve competency units, non-technical skills and safety-critical elements. Failure to meet a safety-critical element results in a Not Yet Competent outcome.

Full attendance is required for the Well Control Fundamentals and Practical Rig Simulation and Competency Assessment modules, with at least 90% attendance overall.

The overall outcome is recorded as Competent, Competent with Development Plan, or Not Yet Competent. The final report includes instructor feedback, readiness recommendations and signatures from the instructor, assessor, manager and candidate.

comments (0)

leave a comment